Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P Medallions - Urethane White River Hardwoods

Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P

Urethane
$71.97 $89.96
Skip to product information
Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P Medallions - Urethane White River Hardwoods
  • Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P Medallions - Urethane White River Hardwoods
  • Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P Medallions - Urethane White River Hardwoods
Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P

Ceiling Medallion (Fits Canopies up to 4 3/8"), 24 1/8"OD x 4 3/8"ID x 2 1/4"P

$71.97 $89.96
MaterialUrethane

White River Hardwoods · Urethane Ceiling Medallions

Ceiling Medallion 24-1/8″ OD

SKU MED1025-C · One-Piece · Fits Canopies to 4-3/8″

High-Density Urethane · Factory Primed · Made in the USA

24-1/8″ round ceiling medallion in high-density urethane, 4-3/8″ center opening. One-piece — a single casting for new fixture installs or when the fixture can come down. Primed and ready for paint.

One-Piece · Solid Casting · Factory Primed · Cuts with Woodworking Tools

A medallion does for a light fixture what a frame does for a painting — it gives the eye a place to land, and the ceiling a reason to be looked at.

Product Details

Dimensions & Fit

SKU Outside Dia. Center Opening Projection Fits Canopy Pieces
MED1025-C 24-1/8″ 4-3/8″ 2-1/4″ up to 4-3/8″ One

"Fits canopy" is the largest fixture canopy the center opening will clear. The center opening can be enlarged on site with a jigsaw or hole saw. Projection is how far the medallion stands off the ceiling.

Why High-Density Urethane

Hand-Carved Detail, Cast Weight

Hand-Carved Master

Every pattern begins as a hand-carved original modeled on historical designs. That master becomes the mold, so the relief is deep and the lines are sharp.

High-Density, Not Vacuum-Formed

Cast solid in high-density urethane foam. It reads like plaster and holds a fastener — unlike thin vacuum-formed "plastic" medallions.

Factory Primed

Arrives primed. Paint to match the ceiling, contrast it, or gild the relief.

Cuts with Woodworking Tools

Enlarge the center for a fan canopy or electrical box with a jigsaw or hole saw. Lightweight enough for one person to hang.

Technical Specifications

Key Facts

SKU

MED1025-C

Type

One-Piece Ceiling Medallion

Shape

Round

Outside Diameter

24-1/8″

Center Opening

4-3/8″

Fits Canopy

up to 4-3/8″

Projection

2-1/4″

Material

High-Density Urethane

Finish

Factory Primed

Made In

USA

Installation

Step by Step

1

Kill the Power

Switch off the circuit at the breaker before touching the fixture or box.

2

Size the Opening

Confirm the fixture canopy clears the center opening. Enlarge with a hole saw if needed; the canopy hides the cut.

3

Dry-Fit & Mark

Hold the medallion to the ceiling, center it on the box, and pencil the outline.

4

Adhesive on the Back

Run construction adhesive around the back near the edge and around the center. Adhesive carries the weight.

5

Fasten Through the Relief

Press up, then set two to four finish screws through low points in the pattern into joists or the box. Countersink and fill.

6

Caulk & Paint

Caulk the outer edge to the ceiling, spot-fill screw heads, and paint.

Trade Program

38% Trade Discount for Design Professionals

Architects, interior designers, builders, and contractors receive 38% off list on ceiling medallions. Apply once and your account is set for every order.

Apply for Trade Access

Care & Handling

Store flat until installed. Dust with a soft brush or vacuum attachment. Clean painted surfaces with a barely damp cloth; avoid solvent cleaners.

MED1025-C — 24-1/8″ one-piece ceiling medallion. White River Hardwoods urethane medallions.

You may also like